The current stable condition of aluminum alloy shutters

Categories:Industry News
Author:
Origin:
Time of issue:2021-07-16
Views:0

Information

Most of the current housing consumption is spent on the consumption of decoration and building materials, and the deepening of the urban system reform is also needed for the housing consumption. Under normal circumstances, the housing reform system prescribed by the state is that as of 2015, every family will have its own housing, and the average living area per person will reach 20-25 square meters. Therefore, the concept of residential consumption is an important content, and from the perspective of the current development situation, decoration must have a lot of room for development in the next few years. The capacity for the building materials market is also very large.

　　Aluminum alloy shutters are a relatively new type of building materials products, because it has a very large development space, there is no way to count the scope of its use, and there is no way to estimate its market capacity. The construction industry is constantly developing rapidly, which is already the most important economic pillar of our people. For the current real estate industry, development is relatively hot, not only is there no possibility of decline, but the market will continue to improve, so that the aluminum alloy shutter industry will have a very good development trend, and there will be more Sales opportunity, this is a very rare development opportunity.

For some low-quality aluminum alloy shutters, they will always appear in the market. Even if consumers choose carefully for many times, it will be difficult to get rid of this situation. Therefore, new products must be used. To replace this inferior product, the appearance of aluminum alloy shutters has changed this historical pattern very well, mainly to replace this inferior product.

In every family and every work unit, there will be aluminum alloy shutters. Whether it is a family or a unit consumer, they all want to see a refreshing feeling. At this time, with the continuous improvement of population quality and economic development, Many people already have very high requirements for the taste of life and the culture and art of life. In the entire building materials industry, the development of aluminum alloy shutters has always been very optimistic.

Scan the QR code to read on your phone

Previous: The choice of aluminum profile is really the thicker the better?

Next: Industrial profiles: frequently asked questions about industrial profiles

Previous: The choice of aluminum profile is really the thicker the better?

Next: Industrial profiles: frequently asked questions about industrial profiles

Related news

4 advantages of aluminum alloy doors and windows

Are you buying doors and windows for a new house or upgrading your current installation? In this case, when you need to complete the transaction, you not only need to look at the aesthetics and the numbers on the invoice, but also need further research. Indeed, your final choice may have a significant impact on your comfort and energy bills. Because of aluminum's strength, durability, and ease of maintenance, you may already consider aluminum as a material for doors and windows. But did you know that high-quality aluminum alloy doors and windows provide more than just these? Read on to learn more about the benefits of aluminum as a material for doors and windows. Four advantages of aluminum alloy doors and windows: 1. Durability: Aluminum is resistant to elements and will not rust Aluminum alloy doors and windows have high durability because the material has corrosion resistance and will not rust. Thanks to the certified surface treatment, aluminum doors and windows maintain their performance and aesthetics throughout their service life. Whether you live in the coastal area of Sydney or the western suburbs, the weather resistance of aluminum will continue to bring you a return on investment. If you live in a high wind area, it is recommended to use aluminum as a strong structural material instead of wood. These attributes make aluminum the right choice for your door, internal kitchen or bedroom windows, patio doors or bathroom windows. 2. Cost: Aluminum is a cheap substitute for wood Aluminum is cheaper than wood, so it's good value for money. In the long run, because aluminum alloy doors and windows have longer service life and better energy performance, they are also cheaper than uPVC, which is a weaker material with slightly lower efficiency. It is easier to customize aluminum windows or doors. Therefore, whether you are replacing the entire wall with a door or you need a unique window configuration, the numbers on the aluminum supply and installation quotations are bound to be lower than wood. To learn more about the prices of aluminum alloy doors and windows, please read our comprehensive guide. Finally, this is not the upfront cost you should worry about. Wood needs higher and more regular maintenance, otherwise, the life of the wood will be greatly reduced. On the other hand, aluminum has worry-free maintenance. Knowing this, it is a wise move to spend some more money when buying new doors and windows, and it will save you a lot of money. However, it all depends on the budget you can afford when you decide to invest. 3. Maintenance: save maintenance time and money Aluminum alloy doors and windows will not rust or fade. Therefore, maintaining them is quick, easy and cheap. The good news is that you usually only need to clean twice a year. To perform this task, you only need soapy water. Clean aluminum doors and windows quickly, then wipe with a soft cloth to keep the mint state. Generally, this is required to ensure that aluminum doors and windows look bright and run smoothly over a long period of time. 4. Energy efficiency: the right glass option has good thermal performance Depending on the quality of the doors and windows, your electricity bill may fluctuate drastically and severely damage your bank account. Poorly ventilated windows or inappropriate doors may seriously affect the efficiency of your home. By allowing heat to escape through cracks and inefficient structures, they force your heating system to keep running. In terms of thermal properties, aluminum has been significantly improved in recent years and has excellent insulation properties. Used in combination with insulated double glazing to limit heat loss and cold wind from entering your house. Coupled with suitable glass options, aluminum door and window frames can help you save a lot of electricity bills.

2021-07-16

Advantages and maintenance of broken bridge aluminum alloy doors and windows over ordinary aluminum alloy doors and windows

The advantages of broken bridge aluminum alloy doors and windows compared to ordinary aluminum alloy doors and windows The home does not have to be luxurious, but it must be energy-efficient, comfortable and healthy. Therefore, broken bridge aluminum alloy doors and windows have become the trend of household doors and windows, and are superior to ordinary aluminum alloy profiles in terms of practical household functions such as energy saving, sound insulation, sound insulation, dustproof, and waterproof. 1. The use of heat-insulating broken bridge aluminum alloy profiles reduces heat conduction and is not easy to deform due to temperature, which greatly prolongs the service life of doors and windows. 2. Prevent condensation. The temperature of the inner surface of the profile with heat insulation strips is close to the indoor temperature, which reduces the possibility of super-saturated water condensation on the surface of the profile. 3. Environmental protection can reduce energy consumption and environmental radiation caused by air conditioning and heating 4. In order to reduce noise, the hollow glass structure of different thicknesses and the hollow structure of the thermally insulated aluminum bridge can effectively reduce the resonance effect of sound waves, prevent the propagation of sound, and reduce the noise by more than 30dB. 5. Energy saving and environmental protection in winter. Window frames with thermal insulation strips can reduce the heat loss through the window frame by 1/3 and are used for indoor heat preservation; in summer, if the room has air conditioning, the broken aluminum windows with thermal insulation strips can reduce energy loss and keep the home warm , Reduce the energy consumption of air conditioners, save energy and protect the environment. 6. The aluminum alloy doors and windows with superior structure and broken bridge are the most advanced aluminum alloy doors and windows at present. It is the fifth generation of new thermal insulation and energy-saving doors and windows after wooden windows, iron windows, plastic steel doors and windows, and ordinary color aluminum alloy doors and windows. Due to the influence of weather, environment, human factors and other factors, it is difficult to avoid the damage of doors and windows during daily use, so how to maintain the broken bridge aluminum alloy doors and windows? 1. Adhesive strips and glass glue are the key to ensure the sealing, heat preservation and waterproofing of aluminum alloy doors and windows on the broken bridge. If they fall off, they need to be repaired and replaced in time. 2. Check the fasteners frequently, and adjust them if they are loose; for the vulnerable parts of the positioning shaft, wind brace, floor spring, etc., you can add appropriate amount of lubricating oil regularly to keep it clean and flexible; 3. During use, do not open and close vigorously. If the opening and closing is not smooth, do not force the operation. The fault should be eliminated first. Misoperation by personnel or loose fasteners is the main reason for the difficulty in opening and closing; 4. Pay attention to the maintenance of broken bridge aluminum alloy doors and windows. When cleaning doors and windows, do not step on the aluminum frame or pull the frame for support; 5. Do not use ordinary soap, washing powder, detergent powder, toilet detergent and other strong acid and alkali cleaning agents. It is recommended to use a soft cloth dampened with water or neutral detergent to wipe. After a rainy day, the raindrops on the glass and door and window frames should be wiped off in time; 6. Pay attention to the inspection of the joint between the door and window frame and the wall. If there is any looseness as time becomes longer, it is easy to deform the frame as a whole, resulting in the doors and windows cannot be closed and sealed. If the screws of the joint are loose, they should be tightened immediately. If the screw feet are loose, apply a small amount of cement with epoxy super glue to seal.

2021-07-16

Installation steps of aluminum alloy doors and windows

Many people tend to spend more time and energy on home selection in home decoration, especially the purchase of aluminum alloy doors and windows. They often ignore the installation of aluminum alloy doors and windows. In fact, the installation of aluminum alloy doors and windows is also very important. Yes, the pool is slightly different. There will be various problems when using it in the future. Therefore, it is necessary to understand the installation knowledge of aluminum alloy doors and windows. Today, the editor will sort out the installation steps of aluminum alloy doors and windows for everyone. Let us find out together. Let's go! 1. Route positioning: 1.1. According to the position, size and elevation of the doors and windows in the plan, measure the edge lines of the doors and windows according to the center line of the doors and windows. For multi-storey or high-rise buildings, the edges of the upper and lower doors and windows shall prevail. The edges of the doors and windows shall be led out with a hanging wire or theodolite. Where the symbols cross the doors and windows of each floor, a single non-straight opening shall be carved. 1.2. The horizontal direction of doors and windows should be based on the horizontal line of the indoor floor +50cm, and the height of the window should be measured upwards, and the elastic line should be a straight line. The height of the windows must be consistent on each floor. 2. Aluminum alloy suspension device Fix the overhang on the aluminum alloy window according to the requirements of the construction drawings, and ensure that the direction is correct and the device is firm. 3. Anti-corrosion treatment: 3.1. When there is a requirement for the anti-corrosion treatment plan for the outside of the door and window frames and external parts, the treatment shall be carried out according to the planning requirements. If there is no requirement in the plan, you can apply anti-corrosion paint or plastic film for maintenance to prevent the cement mortar from directly contacting the outside of aluminum alloy doors and windows. Electrochemical corrosion of aluminum alloy doors and windows occurs. 3.2. When installing aluminum alloy doors and windows, if they are fixed with seam iron, the metal parts of the iron parts and fixing parts should be made of stainless steel, otherwise anti-corrosion treatment is required to avoid electrochemical reaction and corrosion of aluminum alloy. Doors and windows. 4. The aluminum alloy doors and windows are installed in place: According to the positioning line of the doors and windows, install the aluminum alloy door and window frames, adjust the horizontal, vertical and diagonal lengths of the door and window frames in time to meet the quality standards, and then temporarily fix them by wooden wedges. 5. Fixing of aluminum alloy doors and windows: 5.1. When iron parts are embedded on the wall, the iron feet of aluminum alloy doors and windows can be directly welded to the iron parts embedded on the wall, and the welding place needs to be derusted-proof. 5.2. When there is no iron embedded in the wall, the iron feet of aluminum alloy doors and windows can be fixed on the wall with metal expansion bolts or plastic expansion bolts. 5.3. When there is no iron embedded in the wall, an electric drill can be used to drill a hole with a depth of 80mm and a diameter of 6mm on the wall. Use L-shaped 80mm×50mm 6rmn steel bars to glue 108 grout to the long end. Then, punch it into the hole. After the 108 cement slurry finally solidifies, the iron feet of the aluminum alloy doors and windows are welded to the embedded 6mm steel bars. 6. Treatment of gaps between door and window frames and walls: 6.2 After the aluminum alloy door and window device is fixed, the sunshade engineering inspection should be carried out first. After passing the inspection, the gap between the door and window frame and the wall should be dealt with in time according to the planning requirements. 6.2. If there is no plan view, use elastic insulation material or glass wool felt strips to fill the gap layer by layer, leaving 5-8mm deep grooves on the outer and outer surfaces with greasing grease or sealant. 7. Door and window sash and door and window glass device: 7.1. Doors, windows, sashes and glass of doors and windows should be installed after the inspection of the outer wall of the cave wall. 7.2. After the door and window frame device is fixed, slide the door and window, the glass door leaf is put into the frame slot as a whole, and the gap with the fan can be adjusted. 7.3. Open the doors and windows in the frame and the fan frame to assemble the wall, fix the glass after the device is fixed, that is, adjust the gap between the frame and the fan first, then insert the glass into the fan and adjust the direction, insert the sealing strip and sealant. 7.4. The floor spring door should be installed after the door frame and the floor spring host are

2021-07-16

The choice of aluminum profile is really the thicker the better?

In the daily consumption process, people will have such a consumption concept: the higher the price of goods, the better, the more quantity the better, and the more materials the better...Because the more the material, the higher the corresponding price, and the natural quality The better. So, can any product be defined according to this law? When purchasing aluminum alloy profile products, the price of the profile is mainly determined by the thickness of the wall. However, consumers usually have a misunderstanding: the thicker the profile, the better? This is not the case. 　　 When many consumers buy aluminum alloy doors and windows, they will take it for granted that the thicker the aluminum wall thickness, the better the product quality will be if it exceeds the national standard. In fact, this is not the case. According to industry insiders, the national standard for product wall thickness is to ensure product safety and performance, and is set in accordance with energy conservation and environmental protection requirements. It is not that the thicker the product wall thickness, the better the product quality. Because the wall thickness of the profile is too thick, the air-tightness and water-tightness of the product cannot be guaranteed, and the quality of the product is high, which will inevitably lead to excessive waste of resources. Moreover, there are more consumables for products that are too thick than products that meet the national standard, which will inevitably bring too high product prices and bring unnecessary economic burdens to consumers. Therefore, aluminum products that meet the requirements of national standards can be called good products. 　　 Generally speaking, as long as the advertising aluminum materials produced by the regular aluminum alloy profile manufacturers are made of high-quality aluminum ingots, they have good tensile strength and yield. The thickness of the profiles strictly implements the "national standard". 　　It can be seen that the thicker the wall thickness of the aluminum alloy profile, the better. Only in compliance with the relevant national standards, the quality of the product can be well guaranteed.

2021-07-16

Customer Service Hotline：400-158-6906

NORD GAIN

Address: No. 6, Xinglong Street, Gaobeidian City, Baoding City, Hebei Province

-Follow us-

300.cn Beijing